So, it’s been a while since I’ve posted some of my painting progress so this may be more of a paintdump than a paintlog. However, I’ve done a lot lately that I figure is worth sharing.
This past June, Privateer Press released a lot of Khador Man-O-War models, which, as you might have guessed, immediately emptied out my wallet and filled my backlog. I’ve discussed these models previously, as I batch sprayed them with the airbrush then got to work, starting with the tankers and then moving on to the medium-based infantry models.
Anyways, as mentioned in a previous article, I like to do alternate-gender conversions for some of my Khador models, both to represent the contribution of the daughters of the motherland, increase diversity in my army, and put my own little subversive spin on things. Though, between Sorscha, the MoW Bombardier Officer, and some of the fluff in NQP #05, that may be less of a subversion and more of an accurate description of the Man-O-War corps.
As a result, Atanas became Atanasija and Dragos became Dragana. Both were done using bald heads from Statuesque Miniatures. For Atanasija, I kept the hat from Atanas and attached that to the head and in both cases I sculpted the hair on with brown stuff. When it came to Dragana, I did a side-swept undercut, allowing me to add in a couple scars to represent the rough and injury-prone life of a Man-O-War, particularly one as renowned for bashing in the skulls of dirty Cygnaran invaders as her.
Atanasija, Dragana, and the standard bearer were all glorious models: nice and big with plenty of detail and some interesting textures to paint. I would go so far as to say that they have pushed aside the Greylord Forge Seer as the best model in Khador.
When it came to the standard, I knew I wanted to freehand something on there but I wasn’t sure what. After mulling it over for a few days, I eventually found inspiration from a slightly unusual source: the flag of the Republic of Angola. Replacing the machete with a hammer created something that had an air of Khadoriness to it. The Man-O-War Bombardier Officer, as one of the few new releases that isn’t actually a named character, was done up in a pretty standard paint scheme, albeit with the double pink shoulder pad to represent the fact that she is an officer, and some hazard striping on her weapon because believe it or not, when you combine a chainsaw and a grenade launcher, you get something that is actually quite hazardous.
Finally, we get to one of my two favourite characters from the Iron Kingdoms: Kommandant Sorscha Kratikoff. In this case, I chose to stick a little closer to the studio scheme than I usually do as I thought she would look good in white and stand out on the tabletop if I’m playing her with a sea of Man-O-War. Howeer, I did retain the pink and purple from my standard army colours. As I was painting her, however, I noticed something interesting about her pose. If you place her flat on the base as intended, she looks to be in a pretty defensive stance, with her feet planted, her weapons at the ready, and her left leg further back to provide support. However, if you lean her forward a little bit, the pose changes. Suddenly, she looks more dynamic, as though she is rushing forwards. And, given that her signature spell in the game is literally called Wind Rush which allows her to make an extra advance, the decision over whether to go with the studio pose or the leaning forward version was kind of a no-brainer.
So, that’s it for now for the Man-O-War. I also have the chariots, but I’ve got some conversions that straddle the line between stupid and stupid-awesome rolling around in my head, so they will probably be a winter project anyways.
I’ve never been a big fan of the Butcher; guys who go apeshit and murder their own soldiers aren’t exactly sympathetic characters in my book, and when it comes to his little dispute with Sorscha over who murdered who’s father in cold blood, I have to side with my lady Sorscha on this one. Further, when I got into Warmachine, the competitive scene for Khador started and ended with Butcher3 and something about both his playstyle and the idea that if I wanted to seriously compete I had to play Butcher3 rubbed me the wrong way. So, I can say that none of the Butchers have gotten into my gaming rotation, and that may not be likely to change in the near future.
Regardless, I just have to get them all painted. I’ve showed off Butcher1 before, but my Butcher2 and Butcher3 were both interesting conversions that I did a while ago only to have them sit on my shelf for over a year.
First, Butcher3 was fairly straightforward. I had a bad experience with Nyss Hunters back in Mk.II, so naturally, I decided to incorporate pieces of Nyss and a Retribution wreck marker into the conversion. I decided that the dog on the sandbags would be playing fetch, so I added a bow in one of his mouths and an arm in the other. For the other dog, I used the base that came in the package for Butcher and threw on a sword and a severed head because, again, it’s the Butcher, so I have to crank up the gore. Finally, for the Butcher himself, I noticed that the way his left hand was posed, it would be quite simple to add some sausage links to show him feeding his puppies, which I sculpted out of a paper clip and green stuff.
Butcher2 was more complex. I figured that it might be time for another one of my gender-bending warcaster conversions, but I quickly ran into a problem. If I wanted her to be tournament-legal, I needed to make her out of at least 50% Privateer Press parts. The problem is that, at least at the time I started sculpting, I couldn’t find any female models in PP’s line that had quite the Butcherly presence that I was looking for. Fortunately, a solution presented itself in a somewhat strange place: the Trollblood warcaster Grissel. I figured if I just filed off any of the lumpy troll skin protrusions and found the right head to swap out, then I’d just have to do a simple weapon swap and do some sculpting here and there to make her look more like a Khador warcaster.
Initially, I ran into the problem of Grissel being so large compared to the average 30mm model that I couldn’t find a head that didn’t make her look like a pinhead. Eventually, I found something that worked – a 40mm scale head from Hasslefree Miniatures from their Kalee model. This larger scale ended up being close enough to Grissel’s size that it worked.
With the head on the body and the weapon swap working out, the next step was Khadorifying the model a little. For this, I needed to sculpt or scratchbuild a few things to make her look less trollish and more Khador. She needed a few armour plates here and there, such as the shoulder pads and the metal loin cloth thing, to cover up some of the most egregious Trollblood details. and give more of a Khador vibe. I would need to sculpt the cape and make it look like the one seen on Butcher and several other Khador warcasters, with the rectangular plates with three buttons or rivets at the bottom. Finally, I’d need to add one of those special coal-fired warcaster backpacks and some fur around it.
All of this I did with sculpting putties such as brown stuff or milliput and bits of styrene here and there. The only exception was the spikes on the shoulder pads, which were from the PP bits store; I believe they were from the old metal Behemoth model. It was also largely done in layers; a lot of the time when you’re sculpting, it’s much easier to get the basic shape in first, let it dry, then do a second layer to get the details.
After the conversion was done, these models languished on my shelf for a while as I never actually played any of the Butchers, until we started getting close to the end of my campaign to clear off my shelf of shame. There wasn’t too much special about the painting; it was mostly just using the same techniques, styles and colour schemes that have been the mainstay for this army. The one thing I did try was the use of Molotow liquid chrome markers and the ink from them to make the very highest highlight nice and bright. They seem to be useful for true metallic metals, though I’m going to need to play around with them a bit more to see if they are something that I would recommend. Particularly, I want to see how they react to brush painting and blending, and how nicely they play with other acrylic metallics.
In the past few months, I’ve been dipping my toe into Games Workshop games in the form of Necromunda, which a few locals have been running. Suffice it to say, it has been an interesting and positive experience branching out, and there are aspects of the game that I find liberating compared to Warmachine, even if there are also some issues that I have with certain mechanics.
The two things that have stopped me from jumping into any of the Games Workshop games before are that I don’t really want to invest hundreds or thousands of dollars into a second full-size army game, and that I haven’t yet found a faction in any GW game that really speaks to me aesthetically. I don’t like space marines, boxy tanks or gross nurgley things, and that wipes out a large portion of their line. I like to paint female models, and so many factions have a “no girls allowed” policy. And generally, if I don’t dislike a faction’s infantry, I despise their vehicles or vice versa. The blimpdwarves are okay, I guess, but apart from that, my impression of their style ranges from “ugh” to “meh.”
And then, they released House Escher for Necromunda, which is basically what happens when you give a roller derby team a bunch of guns. Between the mohawks, piercings, and cybernetic implants, GW basically nailed a lot of my tastes dead on with these models. I was immediately hooked, and picked up a box before I even knew anyone who was playing because I wanted the models so badly.
These were great models, though compared to a lot of other miniatures, they aren’t for the faint of heart. There are a lot of fairly small pieces; even the faces and heads are two different pieces. This allows for a lot of customization as once you get the legs and torso together, you can pretty much do what you want for the arms, face, and kick-ass mohawk. Fortunately, they are made of some nice hard plastic and clean up fairly easily, so you don’t need much more than your container of Tamiya Extra Thin to get to work and customize them to your heart’s content
When it comes to painting models like these — a somewhat rag-tag group operating outside of any formal military or anything like that, you want to give each model a little bit of individuality but also have something that ties them together. This goes double for the Eschers with their over the top punk aesthetic. So, I decided to take some common elements and put them in the same colour — their armour plates, chestpiece, and shiny leather boots. With those all the same, I had at least enough of a unified theme that I could go wild and make every model a different combination of hair, skin tone, and colour/pattern on their loin cloths.
As a result, I didn’t really do much batch painting on these. While I’m sure it would have been more efficient if I had, there was enough diversity from model to model that the benefits would have been minimal. Further, I just didn’t feel like it, preferring to at least get one or two more models fully painted before next week’s game.
One slightly odd thing I did was that I added a lot of brass to their guns; while extensive use of brass on guns isn’t very realistic as brass framed firearms went out of style over a century ago, I like mixing brass and steel on my metal bits and love the look of TMM brass with a nice deep purple shade.
Finally, I made myself a little display for them out of a few bits of the sector mechanicus terrain and some sheet styrene. It’s far from perfect, but it’s a nice little extra thing that allows them to have their own special place in my display cabinet.
At the moment, I’m neck deep in Necromunda terrain, trying to get everything I have accumulated for the campaign nicely painted up. However, as I finish that project, I have a few things in mind to do next. First, of course, there is clearing off my shelf of shame. There are only seven models remaining: a unit of Greylord Outriders, a heavily converted Vlad3, and a customized Ruin that spontaneously disassembled after falling off my desk a few days ago. I also have a couple models that I’m planning on using as pets for Necromunda, as the real models don’t exist yet and even if they did, I’m not sure I want to pay Forge World prices for them.
In the stash, I have an Me-109B fighter kit that I want to do up in Spanish Republican colours, representing the one that they captured during the Spanish Civil War. I’ve been a little afraid of some of the small parts, photo-etch and cockpit details included in the kit, but I can’t keep avoiding it forever, especially not if I want to enter it in a themed contest coming up in February. Also, with the focus as of late being on banging out armies, it’s been a little while since I’ve done a display piece, so I’d like to work on either a small model or a bust once I clear my plate.
Finally, there is always finishing those probably ill-conceived chariot conversions. Or, I could just totally blow my new year’s resolution to manage the number of unpainted miniatures I own and totally splurge on sales from the likes of Reaper or Bad Squiddo, but I would never be so irresponsible, would I?
Oh wait, their miniatures come with free candy. Never mind then.